在线订购说明
为保障消费者权益，真正做到正品交易，杜绝假冒伪劣产品
除电话订购外，本产品支持 阿里巴巴诚信通 支付宝交易。
阿里巴巴店铺地址: http://songhanplas.1688.com
可以与公司客服沟通进行线上交易。
除电话订购外，本产品支持 阿里巴巴诚信通 支付宝交易。
阿里巴巴店铺地址: http://songhanplas.1688.com
可以与公司客服沟通进行线上交易。
021-58958519 13061808058(蒋先生) 13424755533(赵先生)
联系上海松翰
| 021-58958519 | |
| 13061808058(蒋先生) | |
| 13424755533(赵先生) | |
| |
|
|
|
相关物性索引
|
材料标识 : PA66-GF33%，颜色 : 黑色/Black，厂商品牌 : Ultramid ，材料特性 : 高流动性、美观、耐化学品，材料形状 : 颗粒状/Resin，加工方式 : 注射成型/Injection molding， (更多..)
|
|
R01A-00 is a low flow rate, antistatic polypropylene random copolymer. It is designed for blow molding, thermoforming and extrusion applications that require good stiffness and improved processability. Benefits of this grade include good see-through and contact clarity and good impact resistance at both room and refrigerator temperatures. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. (更多..)
|
|
R01C-00 is a low flow rate, high clarity, and antistatic polypropylene random copolymer designed for extrusion, thermoforming and blow molding applications. This grade benefits from excellent see-through clarity, high room and refrigerator-temperature impact resistance, and good processability. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. (更多..)
|
|
R01C-01 is a low melt flow rate high clarity nucleated random copolymer designed for extruded sheet and profiles, including blow molding and thermoformed packaging. End-use applications that require good see-through clarity combined with good heat resistance and refrigerator temperature impact properties can benefit from using R01C-01. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. (更多..)
|
|
Ultramid A3WG7 HP R01 BK20560 is a 33% glass reinforced, heat stabilized, injection molding PA66 grade with excellent flow and surface finish. (更多..)
|
详细数据
订购指南
| 数据提供企业[ 上海SongHan Plas塑胶原料有限公司 ] | |||||
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 机械性能 | 拉伸强度(引张强度) | ASTM D638/ISO 527 | 26 | kg/cm²(MPa)[Lb/in2] | |
| 断裂伸长率 | ASTM D638/ISO 527 | % | |||
| 拉伸模量 | ASTM D638/ISO 527 | kg/cm²(MPa)[Lb/in2] | |||
| 拉伸屈服伸长率(延伸率) | ASTM D638/ISO 527 | % | |||
| 拉伸断裂伸长率(延伸率) | ASTM D638/ISO 527 | % | |||
| 弯曲模量(弯曲弹性率) | ASTM D790/ISO 178 | 2.1 | kg/cm²(MPa)[Lb/in2] | ||
| 弯曲强度 | ASTM D790/ISO 178 | 37 | kg/cm²(MPa)[Lb/in2] | ||
| 洛氏硬度 | ASTM D785 | ||||
| IZOD 缺口冲击强度 | 1/4" 23℃ | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | ||
| 1/4" -30℃ | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| 1/8" 23℃ | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| 1/8" -30℃ | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| Charpy冲击强度 | 23℃ （缺口） | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | ||
| -30℃（缺口） | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| 23℃（无缺口） | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| -30℃（无缺口） | ASTM D256/ISO 179 | kg·cm/cm(J/M)ft·lb/in | |||
| 物性性能 | 比重（密度） | ASTM D792/ISO 1183 | 1.68 | ||
| 成型收缩率 | ASTM D955 | % | |||
| 熔融指数（流动系数） | 200℃/5kg | ASTM D1238/ISO 1133 | g/10min | ||
| 220℃/10kg | ASTM D1238/ISO 1133 | g/10min | |||
| 吸水率 23℃/24H | ASTM D570/ISO 62 | 0.02 | % | ||
| 热性能 | 热变形温度 | 退火 | ASTM D648/ISO 75 | >500 | ℃（℉） |
| 未退火 | ASTM D648/ISO 75 | ℃（℉） | |||
| 维卡软化点 | ASTM D1525/ISO R306 | ℃（℉） | |||
| 熔点 | - | ℃（℉） | |||
| 燃烧性（率） | UL94 | ||||
| 线性膨胀系数 | ASTM D696/ISO 11359 | mm/mm.℃ | |||
| 电气性能 | 介电常数 | 100HZ | ASTM D150/IEC 60250 | ||
| 1MHZ | ASTM D150/IEC 60250 | ||||
| 体积电阻率 | ASTM D257/IEC 60093 | 1*10^16 | Ω.cm | ||
| 表面电阻率 | ASTM D257/IEC 60093 | Ω | |||
| 耐电弧性 | ISO 14782 | 125 | |||
| 加工条件 | 干燥条件 | ||||
| 加工温度 | 射嘴 | ℃ | |||
| 料筒前段 | ℃ | ||||
| 料筒中段 | ℃ | ||||
| 料筒后段 | ℃ | ||||
| 熔体温度 | ℃ | ||||
| 模具温度 | ℃ | ||||
| 压力 | 注塑压力 | Mpa | |||
| 保压压力 | Mpa | ||||
| 背压 | Mpa | ||||
| 螺杆转速 | rpm | ||||
| 其他 | 备注 | ||||
| 颜色 | 本色，黑色 | ||||
| 特性 | 高温下耐化学和机械性能 | ||||
| 用途 | |||||
