ALCUDIA® LDPE 1970C

牌号ALCUDIA® LDPE 1970C
厂家REPSOL
分类LDPE
介绍ALCUDIA® 1970C is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating. Very high drawdown speeds are achieved throughout the extrusion temperature range, and thin coatings are possible at low temperatures. The molecular structure of the polymer produces an excellent clear coating. It has good heat sealability and moisture barrier properties. Its melt characteristics guarantee good adhesion and low neck-in. There are no smoke or odour problems, even at high temperatures. Contains no additives.

TYPICAL APPLICATIONS
  • Extrusion coating.
  • Coextruded thin film.
  • Injection moulding.

The excellent draw down properties of ALCUDIA® 1970C allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C.
This material has a very low neck-in throughout a wide range of extrusion conditions.
Recommended melt temperature range for extrusion coating from 275 to 330°C.
Temperature range for coextrusion depending on the processed polymers.
Processing conditions should be optimised for each production line.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
REPSOL 产品展示 种类
ALCUDIA® LDPE CA-2130A LDPE
ALCUDIA® LDPE PE-019 LDPE
ALCUDIA® LDPE 2335FG LDPE
ALCUDIA® LDPE 1970C LDPE
ALCUDIA® LDPE PE-063/A LDPE
ALCUDIA® LDPE 2303-F LDPE
ALCUDIA® LDPE 2203F LDPE
ALCUDIA® LDPE 3235FGD LDPE
ALCUDIA® LDPE 2303-FG LDPE
ALCUDIA® LDPE 2810F LDPE

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved