APYRAL 24

牌号APYRAL 24
厂家Nabaltec AG
分类Flame Retardant
介绍APYRAL® products have a very high chemical purity of at least 99.5 %. The remaining constituents consist mainly of sodium oxide, which is part of the crystal lattice and partly adhering to the APYRAL® surface in hydrated form, as well as traces of iron and silicon compounds.
Aluminium hydroxide is non-soluble in water with amphoteric characteristics. Due to the sodium oxide components, a watery APYRAL® suspension has a pH value of 8-9. This must be taken into consideration in watery or other alkali-sensitive solvents or dispersions - particularly where other additives are used, which are restricted in use to a certain pH range. In case of doubt, tests must be made for possible interactions.
In many applications APYRAL® is not only used as flame retardant, but does also fulfil a function as white pigment. Due to its whiteness, APYRAL® behaves neutral to the colouring of polymers.
The Mohs hardness of 2.5 - 3 causes no problems even in highly filled molten masses. The relatively high heat capacity cp of 1.65 J/gK at 400°K (127°C) has a beneficial effect on the dimensional stability under heat for APYRAL® filled polymers. This even has priority in some applications.
With a specific density of 2.4 g/cm3, APYRAL® is a medium-density mineral filler. As a result of the required filling levels, the density of the flame-retarded plastics is increased compared with the unfilled polymer. In total, however, APYRAL® is one of the most attractive flame retardants, even on the basis of a volume-specific cost balance.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Nabaltec AG 产品展示 种类
APYRAL 40CD Flame Retardant
APYRAL AOH 30 Flame Retardant
ACTILOX® B30 Flame Retardant
ACTILOX® B20 Flame Retardant
ACTILOX® B60 Flame Retardant
APYRAL 22 Flame Retardant
APYRAL 40 VS1 Flame Retardant
ACTILOX® 200 AS1 Flame Retardant
APYRAL 33 Flame Retardant
APYRAL 8 Flame Retardant

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved