ASSAB Mirrax ESR

牌号ASSAB Mirrax ESR
厂家ASSAB Pacific Pte. Ltd.
分类Steel
介绍General
Demands placed on plastic mould tooling are increasing. Such conditions require mould steel that possess a unique combination of toughness, corrosion resistance and the ability to reach uniform hardness levels throughout large cross sections. Mirrax ESR has proven to be the right choice for these applications. Mirrax ESR is a premium grade stainless tool steel with the following properties:
  • excellent polishability
  • high corrosion resistance
  • excellent through-hardening properties
  • good ductility and toughness
  • good wear resistance

The combination of these properties provides a steel with outstanding production performance. The practical benefits of good corrosion resistance in a plastic mould can be summarized as follows:
  • Lower mould maintenance costs: The surface of cavity impressions retain their original finish over an extended service life. Moulds stored or operated in humid conditions require no special protection.
  • Lower production costs: Since cooling channels are less likely to be affected by corrosion (unlike conventional mould steel), heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times.
These benefits, coupled with the high wear resistance of Mirrax ESR, offer the moulder low-maintenance, long-life moulds for the greatest overall tooling economy.

Note: Mirrax ESR is produced using the Electro-Slag-Remelting (ESR) technique. The result is a mould steel with a very low inclusion level providing excellent polishability characteristics.

Applications
Although Mirrax ESR is recommended for all types of moulds, its special properties make it particularly suitable for moulds with the following demands:
  • Corrosion/staining resistance, i.e. for moulding of corrosive materials, e.g. PVC, acetates, and for moulds subjected to humid working/storage conditions.
  • High surface finish, i.e. for the production of optical parts, such as camera and sunglass lenses, and for medical components, e.g. syringes, analysis vials etc..
  • Toughness/ductility, i.e. for complex moulds
  • Outstanding through-hardening characteristics i.e. high-hardenability, important for larger moulds.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
ASSAB Pacific Pte. Ltd. 产品展示 种类
ASSAB Vanadis 4 Steel
ASSAB Mirrax ESR Steel
ASSAB XW-42 Steel
ASSAB Dievar Steel
ASSAB 618T Steel
ASSAB Vancron 40 Steel
ASSAB QRO 90 Supreme Steel
ASSAB Polmax Steel
ASSAB Vanadis 10 Steel
ASSAB 88 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved