ATI Steel ATI AL-6XN® Alloy

牌号ATI Steel ATI AL-6XN® Alloy
厂家Allegheny Technologies Incorporated
分类Steel
介绍ATI Allegheny Ludlum AL-6XN® alloy (UNS N08367) is the most corrosion resistant iron-base austenitic stainless alloy produced by Allegheny Technologies at this time. It is a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. It is readily available from stock in a wide range of product forms, including thick plate that is suitable for multi-pass welding during field fabrication. The high strength and corrosion resistance of the AL-6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys in applications where excellent formability, weldability, strength and corrosion resistance are essential. It is also a cost-effective alternative to less expensive alloys, such as Type 316, that do not have the strength or corrosion resistance reqired to minimize life cycle costs in cer tain applications.

The high nickel and molybdenum contents provide improved resistance to chloride stress-corrosion cracking. Copper (Cu) has been intentionally kept to a residual level for improved performance in seawater40. The high alloy composition of the AL-6XN alloy resists crevice corrosion and pitting in oxidizing chloride solutions to a degree previously achieved only by nickel-base alloys and titanium.

AL-6XN alloy is well suited for such applications as:
  • Chemical process tanks and pipelines
  • Process systems for offshore oil and gas platforms
  • Condensers, heat exchangers and piping containing seawater or crude oil
  • Filter washers, vats and press rolls in pulp bleaching plants
  • Power plant flue gas scrubber environments
  • Tall oil distillation columns and packing
  • Desalination equipment and pumps
  • Service water piping systems for nuclear power plants
  • Transformer cases exposed to marine environments
  • Pharmaceutical equipment (for product purity)
  • Food processing equipment
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel ATI 410™ Steel
ATI Steel ATI 15-5™ Steel
ATI Steel ATI 9™ Steel
ATI Steel ATI 332™ Steel
ATI Steel ATI 440A™ Steel
ATI Steel ATI 17-4™ Steel
ATI Steel ATI 409Cb™ Steel
ATI Steel ATI C-300™ Steel
ATI Steel ATI Staballoy AG17™ Steel
ATI Steel ATI 409HP™ (UNS S40920) Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved