ATI Steel Grain-Oriented Electrical Steel (Grade M-5)

牌号ATI Steel Grain-Oriented Electrical Steel (Grade M-5)
厂家Allegheny Technologies Incorporated
分类Steel
介绍Nominal thickness: 0.012in (0.30mm)

ATI Allegheny Ludlum Grain-Oriented Electrical Steel (GOES) is processed under carefully controlled conditions to develop optimum magnetic characteristics in the rolling direction. GOES develops low core losses at high inductions when used as core material in designs with the flux path parallel to the rolling direction. These low losses at high inductions are attained with low exciting currents because of the excellent high induction permeability of GOES. In addition, the normal operating inductions for GOES are sufficiently below the magnetic saturation of the material to allow a comfortable margin of safety in most designs. Processing of GOES is carefully controlled in order to achieve a very high stacking factor for the core material. This stacking factor often exceeds 95 percent of the theoretical maximum. The high usable magnetic induction of GOES, along with the high stacking factor, allow compact core designs requiring the minimum amount of material to be used in the windings surrounding the core. This contributes to low losses, not only in the core (no load losses), but also allows for minimum load losses or winding losses in the transformer.

ATI Allegheny Ludlum GOES also offers low manufacturing costs for transformer cores. GOES may be processed into conventional core designs and is available in a wide variety of widths ranging from 3 inches to 34 inches (7.6 cm to 86.4 cm). GOES can be formed by conventional methods. Slitting, cutting to length, winding, and stacking may all be accomplished using conventional core processing. Stress relief annealing, where required, can also be accomplished using conventional techniques.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel AL 29-4C® (Tubing) Steel
ATI Steel ATI 304 DA™ Steel
ATI Steel ATI 301™ Steel
ATI Steel ATI 430™ Steel
ATI Steel ATI 20-25+Nb™ Steel
ATI Steel ATI Staballoy AG17™ Steel
ATI Steel ATI AL-6XN® Alloy Steel
ATI Steel ATI 800AT™ Steel
ATI Steel ATI 201L HP™ Steel
ATI Steel ATI 455™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved