Ancorsteel® 1000C

牌号Ancorsteel® 1000C
厂家Hoeganaes Corporation
分类Steel
介绍In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce the uniform, dependable steel powders designated as Ancorsteel. Ancorsteel grades are designed for P/M parts requiring densities exceeding 6.7 g/cm 3 .

Ancorsteel 1000C is the highest compressibility iron powder available. Compressibility ratings of 7.1g/cm 3 at 550MPa (40 tsi) provide outstanding sintered properties at lower compacting pressures. With Ancorsteel 1000C, you can achieve densities equivalent to other powders with lower compacting pressures, and thus extend the effective working range of your compacting press. Due to its low oxygen and nitrogen levels, Ancorsteel 1000C is also used extensively for electromagnetic applications.

Why Ancorsteel 1000 series powders are preferred
  • Purity—Special melt practices and select raw materials input give us consistently lower levels and better control of residual and tramp elements.
  • Compressibility—Strict controls in annealing and iron powder screening result in the highest compressibility powders available.
  • Green Properties—The technology of iron powder atomization and control of particle shape provide parts with uniform green density and excellent strength.
  • Sintered Strength—Purity, compressibility and excellent greeen properties create higher strength components when sintered than are possible with lesser quality materials.
  • Quality—Uniform, high volume production utilizing state-of-the-art SPC techniques at each processing stage assures the highest standards of consistency.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Hoeganaes Corporation 产品展示 种类
Ancorloy® 4 Steel
Distaloy® 4800A Steel
Ancorsteel® 50 HP Steel
Ancorsteel® 4300 Steel
Ancorsteel® AMH Steel
Ancorsteel® 1000C Steel
Ancorsteel® 1000B Steel
Ancorsteel® 45P Steel
Ancorsteel® 30 HP Steel
Ancorsteel® 1015 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved