牌号 | Aquivion® P87S-SO2F |
厂家 | Solvay Specialty Polymers |
分类 | PFSF |
介绍 | Aquivion® P87S-SO2F are chemically-stabilized (denoted by the S-suffix) perfluorinated pellets in the sulfonyl fluoride (-SO2F) form that exhibit an Equivalent Weight (EW) of 870 g/eq. This material is based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Solvay. Aquivion® P87S-SO2F resin can be easily melt extruded into a variety of shapes. The extruder should be equipped with a standard three-zone metering screw devoid of barrier or mixing elements. Optimum temperature settings will depend on the configuration of the equipment, but generally range from 200 to 300°C. Optionally, functional groups in the molded part are then hydrolyzed in baths or wet benches with a heated base (NaOH, KOH etc) reaction which may take minutes or hours, depending on thickness and conditions. Aquivion® P87S-SO2F can be directly hydrolyzed as described, either completely or only on their outer surface. This will enable functional activity of the sulfonic acid / sulfonyl salt groups for ion-exchange operations or as an acid catalyst. Like other fluoropolymers, Aquivion PFSA pellets are corrosive in the melt; therefore, all parts having prolonged contact with the melt should be made with corrosion-resistant materials such as Hastelloy®, Inconel®, Monel® or Xaloy®. Chrome or nickel plating is not recommended since they are typically only sufficient for brief processing tests. |
Solvay Specialty Polymers 产品展示 | 种类 |
---|---|
Ryton® QA220N | PPS |
Polidan® S/I 20 | XLPE |
KetaSpire® KT-820 GF30 | PEEK |
Udel® P-3500 LCD MB | PSU |
Tecnoflon® T 538 | 氟橡胶 |
Polymist® XPP 511 | PTFE |
KetaSpire® KT-820FP | PEEK |
Udel® P-1700 LCD | PSU |
AvaSpire® AV-651 GF30 | PAEK |
Algoflon® F 7 | PTFE |
订购说明