CAB-O-SIL® TS-530

牌号CAB-O-SIL® TS-530
厂家Cabot Corporation
分类Compatibilizer / Adhesion Promoter
介绍CAB-O-SIL® TS-530 is a high surface area fumed silica that has been surface-modified with hexamethyldisilazane. The treatment replaces some of the hydroxyls on the surface of the silica resulting in increased hydrophobicity and very different performance than untreated silica.

TS-340 is characterized by:
  • High purity
  • Aggregate structure
  • Submicron particle size
  • Low bulk density
  • Hydrophobic surface chemistry

Application Information:

CAB-O-SIL TS-530 is used primarily for rheology control in medium to high polarity inks, coatings and adhesives and reinforcement of silicone rubber.
Ink, Coating and Adhesive Systems:

In medium to high polarity inks, coatings and adhesives, TS-530 provides low viscosity build with good sag resistance and anti-settling of pigments and fillers. This combination of properties makes TS-530 very useful in highly filled systems such as corrosion-resistant coatings. In highly filled systems, TS-530 provides good anti-settling of the filler without significant, unwanted increase in viscosity.

In inks and coatings where surface appearance is important, TS-530 can provide a good balance of sag resistance, flow and leveling resulting in a smooth surface.
Silicone Rubber:

In HTV and liquid silicone rubber, TS-530 provides good reinforcement. As the surface is fully treated, further modification of the silica surface is not necessary to prevent crepe hardening. The compatibility of the TS-530 surface treatment with silicones enables faster incorporation and dispersion than an untreated fumed silica.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Cabot Corporation 产品展示 种类
CABELEC® CA6141 PC
CABOT Aerogel Particles P200 Antioxidant / Heat Stabilizer
MONARCH® 900 Pigment
CAB-O-SPERSE® 4012K Antiblock
BLACK PEARLS® 4350 Pigment
CAB-O-SIL® EH-5 Compatibilizer / Adhesion Promoter
ELFTEX® 570 Pigment
CAB-O-SIL® S-17D Silicon Based Compound
CAB-O-SIL® MS-55 Silicon Based Compound
CAB-O-SIL® EL-1000 Silicon Based Compound

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved