Carpenter Nickel 200/201 Alloys

牌号Carpenter Nickel 200/201 Alloys
厂家Carpenter Technology Corporation
分类Nickel
介绍Carpenter Nickel 200 alloy is a commercially pure nickel that exhibits good corrosion resistance. It is ferromagnetic and has relatively low electrical resistivity. This combination of properties has allowed its use in a wide variety of applications.

Because the alloy displays good corrosion resistance, it has been used in food handling equipment, caustic solutions, and general corrosion-resistant parts and structures. The magnetic and mechanical properties have enabled it to be used in devices requiring magnetic actuated parts. The excellent combination of properties enables Carpenter Nickel 200 alloy to be cold worked by forming and drawing. It is readily welded and will retain its properties at both subzero and elevated temperatures. Its low electrical resistivity has allowed its use as conducting leads and terminals in electrical and electronic components.

Because of its magnetostrictive properties, (specifically significant length change when magnetized), the nickels have been used in sonic devices such as sonar or for control in ultrasonic welding.

Carpenter Nickel 200 alloy meets the requirements of ASTM Specification B-160.

Carpenter Nickel 201 alloy is a low carbon modification of Carpenter Nickel 200 alloy that has found applications in the electronic industry at temperatures up to 1200°F (649°C). It is preferred to Carpenter Nickel 200 alloy above 600°F (315°C), because of its better resistance to "creep."

This alloy has a low annealed hardness and very low work-hardening rate that is desirable for cold forming operations such as deep drawing, spinning, coining, etc. It has been used in corrosion-resistant equipment such as caustic evaporators, in spun anodes, combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide some advantage.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Pyromet® Alloy 617 Nickel
Pyromet® Alloy 680 Nickel
Carpenter Nickel 211 Alloy Nickel
Pyromet® Alloy 41 Nickel
Carpenter Nickel 205 Alloy Nickel
Carpenter Nickel 200/201 Alloys Nickel
Carpenter HyMu "80"® Alloy Nickel
Pyromet® Alloy 31V Nickel
Pyromet® Alloy 625 Nickel
Pyromet® Alloy 718 Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved