Carpenter Temperature Compensator "30"® Alloy (Types 2, 3 and 4)

牌号Carpenter Temperature Compensator "30"® Alloy (Types 2, 3 and 4)
厂家Carpenter Technology Corporation
分类Iron
介绍Carpenter Temperature Compensator "30"® alloy is a 30% nickel-iron alloy whose magnetic permeability decreases at a controlled rate with increase in temperature. The alloy has been used in electrical circuits to compensate for the effect of variations in ambient temperature. Three types of Carpenter Temperature Compensator "30" are available, each having different temperature-permeability characteristics which are controlled precisely by special processing, heat treatment and composition balance.

These materials could be considered for use in "shunt" applications. A shunt is a conductor joining two points in a magnetic line circuit and forming a desired circuit or path through which some of the magnetic lines pass. At low temperatures the magnet is strong but the shunt, having high permeability, diverts a portion of the "flux" (magnetic current) away from the gap. As temperature increases the pole strength of the magnet decreases, but the permeability of the shunt decreases, so less flux is diverted through the shunt.

If the shunt is properly designed, the flux in the gap can be held constant over a fairly wide temperature range, thereby compensating for temperature changes.

Carpenter Temperature Compensator "30" alloy operates over a temperature range from -60/160°F (-51/71 °C).

Applications:
The three different types of this alloy have been used as shunts in watt-hour meters, speedometers, tachometers, voltage regulators and similar electrical instruments.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Carpenter Temperature Compensator "32" (Type 1) Iron
Pyromet® Alloy CTX-1 Iron
Carpenter Temperature Compensator "30"® Alloy (Types 2, 3 and 4) Iron
Carpenter Low Expansion "42"® Dumet Core Rod Iron
Hiperco® 15 Alloy Iron
Hiperco® 27 Alloy Iron
Carpenter High Permeability "49"® Alloy Iron
NCF 3015 Alloy Iron
Kovar® Alloy Iron
Pyromet® Alloy CTX-3 Iron

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved