Carpenter Ti-3Al-8V-6Cr-4Mo-4Zr (Beta C(TM))
| 牌号 | Carpenter Ti-3Al-8V-6Cr-4Mo-4Zr (Beta C(TM)) |
| 厂家 | Carpenter Technology Corporation |
| 分类 | Titanium |
| 介绍 | Pure titanium undergoes an allotropic transformation from the hexagonal close-packed alpha phase to the body-centered cubic beta phase at a temperature of 882.5°C (1620.5°F). Alloying elements can act to stabilize either the alpha or beta phase. Through the use of alloying additions, the beta phase can be sufficiently stabilized to coexist with alpha at room temperature. This fact forms the basis for the creation of titanium alloys that can be strengthened by heat treating. Titanium alloys are generally classified into three main categories: alpha alloys, which contain neutral alloying elements (such as Sn) and/or alpha stabilizers (such as Al, O) only and are not heat treatable; alpha + beta alloys, which generally contain a combination of alpha and beta stabilizers and are heat treatable to various degrees; and beta alloys, which are metastable and contain sufficient beta stabilizers (such as Mo , V) to completely retain the beta phase upon quenching, and can be solution treated and aged to achieve significant increases in strength. Ti-3Al-8V-6Cr-4Mo-4Zr (Ti-3-8-6-4-4, commonly known as Beta-C TM ) is a metastable beta alloy developed in the 1960s. Like other beta alloys, it is used when particularly high strengths are needed along with the light weight and corrosion resistance offered by titanium. Ti-3-8-6-4-4 has gained in popularity among beta alloys because it is one of the easier beta alloys to melt, exhibiting low segregation, and to process, exhibiting good working and heat treating properties. Depending on the application, Ti-3-8-6-4-4 can be used in either the solution annealed (ST) or the solution treated plus aged (STA) conditions. Increases in strength on the order of 40% are obtained by solution treating and aging. Applications: Ti-3-8-6-4-4 is appropriate for applications where very high strength, light weight and corrosion resistance are important. It has become a standard material for a particular niche of specialized applications which have included aircraft springs and underground tubes and casing equipment for gas and oil well operations. It has also been used in fasteners and high-performance auto racing applications. |
在线客服: 
申请技术报告方式
可通过以下我公司客服QQ，索要技术报告
| 客服1： |
客服2： |
| Carpenter Technology Corporation 产品展示 | 种类 |
|---|---|
| Micro-Melt® NCORR™ Stainless | Steel |
| CRB-7® Alloy | Steel |
| Carpenter O1 | Steel |
| AerMet® 340 Alloy | Steel |
| Carpenter No. 484 Tool Steel | Steel |
| Carpenter 18Cr-2Ni-12Mn Stainless | Steel |
| Carpenter Invar 36® Alloy | Iron |
| Project 70+® 15Cr-5Ni Stainless | Steel |
| Carpenter® CTS® XHP Alloy | Steel |
| EnduraMet® 32 Stainless | Steel |
订购说明
上海松翰塑化科技有限公司订货流程
【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。