Cytec VTF261

牌号Cytec VTF261
厂家Cytec Industries Inc.
分类Adhesive
介绍VTF261 surfacing materials are based on Cytec's 'ZPREG®' selective impregnation surfacing technology and are recommended for use with the VTM®260 Series rapid lay-up prepregs and ZPREG materials. VTF261 surfacing materials are capable of achieving high quality cosmetic finish or paint ready surfaces direct from the mould.

In common with all VTM260 Series materials, VTF261 can be cured under vacuum bag pressure at temperatures between 65°C and 120°C (149°F and 248°F). The maximum end use service temperature is 100°C (212°F) after post- cure.

Differentially coated prepreg formats are recommended for relatively thin components where a clear cosmetic finish is required. ZPREG formats are recommended for large or thick components where flaw-free paintable surfaces may be achieved from standard tooling.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Cytec Industries Inc. 产品展示 种类
FM® 350NA Adhesive
FM® 2555 Adhesive
Cytec L-305 Adhesive
FM® 309-1 Adhesive
CORFIL® 615 Adhesive
FM® 300-2 Adhesive
CORFIL® 625-1 Adhesive
FM® 6555-1 Adhesive
Cytec L-705 Adhesive
FM® 209-1 Adhesive

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved