Dense Fill™ DF211(A)

牌号Dense Fill™ DF211(A)
厂家The R.J. Marshall Company
分类Flame Retardant
介绍The R.J. Marshall Company offers a full line of alumina trihydrate solid surface filler systems. The Dense Fill series offers excellent stain resistance, easy wet-out and excellent air release properties. These Dense Fill products are easy to pigment, allowing the creation of a wide range of colors for custom applications. As in all ATH materials, meeting Class I flame and smoke requirements is an added benefit.

Suggestions For Use:
Equipment
  • The basic equipment needed for solid surface manufacturing includes a vacuum mixer or continuous casting machine with a densifier, appropriate molds, a table sander, and necessary saws and routers. For additional information, please see our paper entitled Solid Surface Manufacturing.

Resin Suggestions
  • Consult your resin supplier for the appropriate resin to use. The appearance of the final product may vary in color consistency when different resins are used. The recommended resin level for most DF applications is 33-38% by weight. This percentage may vary depending on the resin viscosity, ambient and matrix temperatures and your preferred mix consistency.

Catalyst Level
  • Choose a catalyst suitable for use with alumina trihydrate and your solid surface resin. A catalyst level of 1.5% by weight of resin is a recommended starting point. Differing catalyst levels can change the overall color of the material. The gel time should be between 20 and 30 minutes. If excessive gel times are experienced, a change in catalyst may be necessary.

Matrix Consistency
  • When the resin level is around 33-38% by weight, the matrix should have a workable consistency. The use of additives such as DC Granules or Hylite Granules may require a higher viscosity mix and less or no vibration.

Vibration
  • If vibration is necessary, it should be minimal. Vacuum mixing, creating a matrix with an appropriate viscosity, and using proper pouring techniques should eliminate air entrapment in the matrix.

Thermal Cycling
  • When poured by standard manufacturing procedures, our Dense Fill will meet or exceed all ANSI/ICPA SS-1-2001 certification standards.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
The R.J. Marshall Company 产品展示 种类
OnyxFill™ OF600 Flame Retardant
C-TEC™ LS Z8A Flame Retardant
C-TEC™ CT-AO Flame Retardant
ATH A 245 Flame Retardant
Dense Fill™ DF230 Flame Retardant
H-TEC™ HTMB10 Flame Retardant
ATH AH 280 Flame Retardant
C-TEC™ CT ZB 400 Flame Retardant
OnyxFill™ OF300 Flame Retardant
Maxfil™ MX104 Flame Retardant

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved