Hapcoat™ 3726

牌号Hapcoat™ 3726
厂家Hapco Inc.
分类TP,未指定
介绍HAPCOAT 3726 is a high heat resistant, thixotropic, gel coat that is specifically designed to reproduce surface details exactly and eliminate print through. When HAPCOAT 3726 is used with HAPCURE 7 curing agent, it is ideally suited for molds filled with aluminum conductites or sand, or backed with fiberglass cloth. This is due to its fast "tack-up" time which eliminates any print through.
  • Formulated to withstand 350°F continuous service, & intermittent service to 400°F
  • Being thixotropic, HAPCOAT 3726 applies easily with a brush, and will not sag when applied to a vertical surface
  • Easily machined and can be drilled, tapped, or milled with conventional tools
  • When used with HAPCURE 7, HAPCOAT 3726 reaches "tacked-up" (bubble gum) state in approximately 30-45 minutes.
  • Short-term exposure to 400°F and continuous service to 350°F is possible with this system.
  • Reproduces the finest surface detail and texture.
  • There is almost no shrinkage during cure with HAPCOAT 3726.
  • May be used with a variety of curing agents to accommodate a wide range of application requirements.

HAPCOAT 3726 Applicatiions:
These high heat transfer and high heat distortion properties make HAPCOAT 3726 especially suitable for:
  • Sample and production molds for foam molding
  • Slush molding
  • Injection molding
  • Blow molds
  • Autoclave molds
  • Molds for low melting alloys for wax
  • Molds for thermosets, such as epoxies, polyesters, silicones, and urethanes
  • High temperature vacuum and pressure forming molds
  • Hot press dies
  • Foam molds
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Hapco Inc. 产品展示 种类
Hapflex™ 570 TP,未指定
Di-Pak™ R-4806 TP,未指定
Ultralloy™ 806 TP,未指定
Di-Pak™ R-4307FR TP,未指定
Di-Pak™ E-4888 TP,未指定
Di-Pak™ R-4307 TP,未指定
Ultraclear™ 481 TP,未指定
Di-Pak™ R-4354 TP,未指定
Hapflex™ 1056-5 TP,未指定
Di-Pak™ E-4565 TP,未指定

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved