High Performance Alloys, Inc. INCONEL® 600-BAR-0.375

牌号	High Performance Alloys, Inc. INCONEL® 600-BAR-0.375
厂家	High Performance Alloys, Inc.
分类	Nickel
介绍	A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments. Alloy 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000 deg F(1093 °C). The high nickel content of the alloy enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Its chromium content gives the alloy resistance to sulfur compounds and various oxidizing environments. The chromium content of the alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions like hot, concentrated nitric acid, 600 has poor resistance. Alloy 600 is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide. Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Alloy 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels. Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more. Characteristics Resistant to a wide range of corrosive media. The chromium content gives better resistance than Alloy 200 and 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions. Virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors. Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550 °C in these media, this alloy has been shown to be one of the most resistant of the common alloys. At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength. The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases. Under alternating oxidizing and reducing conditions the alloy may suffer from selective oxidation. Applications Thermocouple sheaths. Ethylene dichloride (EDC) cracking tubes. Conversion of uranium dioxide to tetrafluoride in contact with hydrofluoric acid. Production of caustic alkalis particularly in the presence of sulfur compounds. Reactor vessels and heat exchanger tubing used in the production of vinyl chloride. Process equipment used in the production of chlorinated and fluorinated hydrocarbons. In nuclear reactors uses are for such components as control rod inlet stub tubes, reactor vessel components and seals, steam dryers and d separators in boiling water reactors. In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc. Furnace retort seals, fans and fixtures. Roller hearths and radiant tubes, in carbon nitriding processes especially.

在线客服:

021-58958519

13061808058(蒋先生)

13424755533(赵先生)

申请技术报告方式

可通过以下我公司客服QQ，索要技术报告

客服1：

客服2：

High Performance Alloys, Inc. 产品展示	种类
High Performance Alloys, Inc. Nickel 201-SHEET-0.037	Nickel
High Performance Alloys, Inc. INCONEL® 601-BAR-0.25	Nickel
High Performance Alloys, Inc. MONEL® R405-HEX-1.625	Nickel
High Performance Alloys, Inc. HASTELOY® C-276-HEX-0.437	Nickel
High Performance Alloys, Inc. HASTELLOY® HX-BAR-0.75	Nickel
High Performance Alloys, Inc. Nickel 200-BAR-0.75	Nickel
High Performance Alloys, Inc. MONEL® K500-BAR-4	Nickel
High Performance Alloys, Inc. HASTELLOY® HX-FORGING-RING	Nickel
High Performance Alloys, Inc. INCONEL® 600-BAR-0.5	Nickel
High Performance Alloys, Inc. MONEL® R405-FORGING-BAR/PANCAKE	Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！

【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。

【订购流程】
订货流程

【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。

换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。