High Performance Alloys, Inc. INCONEL® 601-FORGING-SQUARE/RECTANGULAR

牌号High Performance Alloys, Inc. INCONEL® 601-FORGING-SQUARE/RECTANGULAR
厂家High Performance Alloys, Inc.
分类Nickel
介绍Nickel, higher chromium content for better resistance to oxidizing and reducing environments; for severely corrosive environments at elevated temperatures. Good oxidation resistance to 2200 °F. Good formability.
Instrument probes, furnace muffles, electronic components, chemical and food process equipment, heat treating equipment, nuclear steam generator tubing.

Inconel nickel-chromium-iron alloy 601 is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel alloy 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.

The limiting chemical composition of Inconel alloy 601 is listed in table 1. The composition is a face-centered-cubic solid solution with a high degree of metallurgical stability. The alloy's nickel base, in conjunction with substantial chromium content, provides resistance too many corrosive media and high-temperature environments. Oxidation resistance is further enhanced by the aluminum content.

Characteristics
  • The most important property of Alloy 601 is resistance to oxidation at very high temperatures up to 1250 °C. Even under severe conditions such as, cyclical heating and cooling. This is possible due to Alloy 601 having a tightly adherent oxide layer which is resistant against spalling.
  • Resistance to carburization is good, also resistant to carbon nitriding conditions.
  • Due to high chromium and some aluminum content, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.

Applications
  • Trays, baskets and fixtures used in various heat treatments such as carburizing and carbon nitriding.
  • Refractory anchors, strand annealing and radiant tubes, high velocity gas burners, wire mesh belts etc.
  • Insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.
  • Thermal reactors in exhaust system of petrol engines.
  • Fabricated combustion chambers.
  • Tube supports and ash trays in the power generation industry.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
High Performance Alloys, Inc. 产品展示 种类
High Performance Alloys, Inc. HASTELLOY® HX-SHEET-0.037 Nickel
High Performance Alloys, Inc. HASTELLOY® HX-PLATE-0.25 Nickel
High Performance Alloys, Inc. MONEL® 400-SHEET-0.093 Nickel
High Performance Alloys, Inc. INCONEL® 601-PLATE-0.375 Nickel
High Performance Alloys, Inc. INCONEL® 718-BAR-1.5 Nickel
High Performance Alloys, Inc. Nickel 200-BAR-1.5 Nickel
High Performance Alloys, Inc. INCONEL® 600-PLATE-0.187 Nickel
High Performance Alloys, Inc. MONEL® 400-BAR-0.875 Nickel
High Performance Alloys, Inc. INCONEL® 601-FORGING-BAR/PANCAKE Nickel
High Performance Alloys, Inc. HASTELOY® C-276-BAR-0.5 Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved