High Performance Alloys, Inc. MONEL® 400-BAR-0.5

牌号High Performance Alloys, Inc. MONEL® 400-BAR-0.5
厂家High Performance Alloys, Inc.
分类Nickel
介绍High strength, good weldability, excellent corrosion resistance over wide range of temperatures and conditions.
Valves, pumps, shafts, marine fixtures, fasteners, electrical, and electronic components, processing equipment, petroleum refining and production equipment, feed water heaters and other heat exchangers.

A Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.
Alloy 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. The alloy is characterized by good general corrosion resistance, good weld ability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. The alloy is widely used in the chemical, oil and marine industries.

Characteristics
  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
  • This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
  • Good mechanical properties from subzero temperatures up to about 480 °C.
  • Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
  • Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
  • Excellent resistance to chloride ion stress corrosion cracking.

Applications
  • Feed water and steam generator tubing.
  • Brine heaters, sea water scrubbers in tanker inert gas systems.
  • Sulfuric acid and hydrofluoric acid alkylation plants.
  • Pickling bat heating coils.
  • Heat exchangers in a variety of industries.
  • Transfer piping from oil refinery crude columns.
  • Plant for the refining of uranium and isotope separation in the production of nuclear fuel.
  • Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics.
  • Monoethanolamine (MEA) reboiling tube.
  • Cladding for the upper areas of oil refinery crude columns.
  • Propeller and pump shafts.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
High Performance Alloys, Inc. 产品展示 种类
High Performance Alloys, Inc. MONEL® 400-SHEET-0.032 Nickel
High Performance Alloys, Inc. MONEL® K500-BAR-1.125 Nickel
High Performance Alloys, Inc. MONEL® 400-BAR-1.75 Nickel
High Performance Alloys, Inc. HASTELLOY® HX-FORGING-STEP Nickel
High Performance Alloys, Inc. MONEL® R405-BAR-2.25 Nickel
High Performance Alloys, Inc. HASTELLOY® HX-FORGING-RING Nickel
High Performance Alloys, Inc. MONEL® 400-FORGING-STEP Nickel
High Performance Alloys, Inc. MONEL® 400-BAR-0.625 Nickel
High Performance Alloys, Inc. MONEL® R405-BAR-2 Nickel
High Performance Alloys, Inc. HASTELOY® C-276-FORGING-BAR/PANCAKE Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved