High Performance Alloys, Inc. Nickel 201-SHEET-0.125

牌号	High Performance Alloys, Inc. Nickel 201-SHEET-0.125
厂家	High Performance Alloys, Inc.
分类	Nickel
介绍	Commercially pure wrought nickel, good mechanical properties, excellent resistance to many corrosives. Nickel 201 has low carbon (0.02% max.) for applications over 600 °F (315 °C). Food processing equipment, chemical shipping drums, caustic handling equipment and piping, electronic parts, aerospace and missile components, rocket motor cases, magneto-strictive devices Commercially pure wrought Nickel with similar properties to Alloy 200 but with a lower carbon content to prevent embrittlement by inter-granular carbon at elevated temperatures. Nickel 201 can be hot formed to almost any shape. The temperature range 1200 °F to 2250 °F is recommended and should be carefully abided as the proper temperature is the most important factor in achieving hot malleability. Full information of the forming process should be sought and understood before proceeding. Nickel 201 is the low carbon version of Nickel 200. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600 °F. With low base hardness and lower work-hardening rate, it is particularly suited for cold forming. Nickel 201 can be cold formed by all conventional methods, but because nickel alloys have greater stiffness than stainless steels more power is required to perform the operations. Characteristics Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550 °C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid. Virtually immune to inter granular attack above 315 °C, chlorates must be kept to a minimum. Applications Manufacture and handling of sodium hydroxide, particularly at temperature above 300 °C. Production of viscose rayon. Manufacture of soap. Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane. Manufacture of vinyl chloride monomer. Storage and distribution systems for phenol immunity from any for of attack ensures absolute product purity. Reactors and vessels in which fluorine is generated and reacted with hydrocarbons

在线客服:

021-58958519

13061808058(蒋先生)

13424755533(赵先生)

申请技术报告方式

可通过以下我公司客服QQ，索要技术报告

客服1：

客服2：

High Performance Alloys, Inc. 产品展示	种类
High Performance Alloys, Inc. MONEL® R405-HEX-1.375	Nickel
High Performance Alloys, Inc. MONEL® R405-BAR-0.687	Nickel
High Performance Alloys, Inc. HASTELLOY® HX-BAR-4.25	Nickel
High Performance Alloys, Inc. MONEL® K500-BAR-1.5	Nickel
High Performance Alloys, Inc. Nickel 200-BAR-1	Nickel
High Performance Alloys, Inc. MONEL® R405-HEX-0.75	Nickel
High Performance Alloys, Inc. INCONEL® 601-FORGING-RING	Nickel
High Performance Alloys, Inc. MONEL® 400-FORGING-SQUARE/RECTANGULAR	Nickel
High Performance Alloys, Inc. Nickel 201-BAR-0.25	Nickel
High Performance Alloys, Inc. MONEL® R405-FORGING-STEP	Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！

【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。

【订购流程】
订货流程

【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。

换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。

沪ICP备:15027283-1号

特诺尔爱佩斯系列塑料专营韩国晓星POK材料专营巴西Braskem材料专营亚罗德ALLOD材料专营