INSPIRE™ DLGF 9631.01 Z
| 牌号 | INSPIRE™ DLGF 9631.01 Z |
| 厂家 | Trinseo |
| 分类 | PP均聚物 |
| 介绍 | DLGF 9631.01 Z is based on polypropylene homopolymer and reinforced with 60% by weight of long glass fibers. (PP-LGF60, Long Glassfiber Granulate). DLGF 9631.01 Z is produced by pultrusion / meltimpregnation process, thereby ensuring thorough impregnation of all the filaments in the glassfiber-rovings and also providing improved ‘pellet robustness' for air conveying. It is available in ‘standard black' colour (TR 7701862). This PP-LGF60 is a ‘concentrate' which has to be diluted - usually with ‘neat'-PP but also mineral-filled PP-based compounds can be used. The ‘dilution' is typically done as a dry-blend of granulates by means of gravimetric dosing devices at the injection-molding machine. A weight ratio of 1 : 1 of DLGF 9631.01 Z and i.e. LGF 8100 PP-copolymer will result in a composite-material-system having 30% by weight of glassfibers. The ‘long' glass fibers (initial length = 11 mm) provide high stiffness, strength and impact-resistance to the injection molded parts. DLGF 9631.01 Z has been especially formulated to meet the requirements for use in automotive ‘under-the-hood' (UTH) and ‘under-body' applications i.e. front-end carriers (FEC) aka ‘bolster', impingement shields or structural parts like i.e. battery trays or spare wheel wells. The long term heat ageing resistance (LTHA) has been increased to a high level as needed for ‘UTH' applications. Injection molded parts based on DLGF 9631.01 Z diluted with ‘neat'-PP to 30% GF-content will show no signs of degradation and surpass the limit of > 1000 h @ 150°C. When diluted to 40% GF-content, the heat aging performance of composites based on DLGF 9631.01 Z will increase beyond the 1000 h. In many cases, even a dilution to 20% will result passing beyond 1000 h @ 150°C, however this will depend on the wall-thickness of molded parts as well as the choice of dilution resin and therefore, it is recommended to conduct own tests. For large size molded parts, the PP-types chosen for dilution typically have MFI values in the range of 40 - 80 (g/10min @ 230°C) and for most applications the choice of impact-copolymers like LGF 8000 or LGF 8100 (European grades) and LGF 8600 or LGF 8500 (‘corresponding' North American grades) represents the best property balance. For smaller parts / shorter flow-paths, the dilution can also be done with PP-types having MFI in the range of 10 - 20 for increased low temperature impact performance. To meet certain application-specific requirements the polymer-type for dilution could also be homopolymer PP (LGF 7000, LGF 7600) as well as mineral-filled/compounded PP-grades. Eventually, a third component (i.e. talcum-masterbatch, DTFC AP.71) can be added to control shrinkage and warpage, thereby increasing the available options for optimization of the material-system. Note: The properties shown below have been measured on standardized ‘dogbone'-shape specimens (ISO 3167). However, the mechanical properties which will be present in ‘real' injection-molded parts may be different - depending on the glassfiber-orientation and the fiber-length distribution profile - which themselves are resulting from processing parameters and hardware configuration (such as i.e. the type of screw and mixing elements, back-pressure during dosing cycle, diameter and radii of nozzle and hot-runners, number and size of gates, speed of injection during mold filling and flow-path and flow-length within the mold). |
在线客服: 
申请技术报告方式
可通过以下我公司客服QQ，索要技术报告
| 客服1： |
客服2： |
| Trinseo 产品展示 | 种类 |
|---|---|
| EMERGE™ PC 8230-31 | PC |
| EMERGE™ PC 8430-22 | PC |
| INSPIRE™ TF7000 ES | PP，未指定 |
| STYRON™ H9152T | PS (HIPS) |
| EMERGE™ PC/ABS 7350 | PC+ABS |
| CALIBRE™ 891-10 | PC |
| CALIBRE™ 301 HMR FC030003 | PC |
| CALIBRE™ 303V-15 | PC |
| STYRON™ 685F | PS (GPPS) |
| MAGNUM™ 3525 | ABS |
订购说明
上海松翰塑化科技有限公司订货流程
【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved