Megapoly MG-30

牌号Megapoly MG-30
厂家Akrochem Corporation
分类Compatibilizer / Adhesion Promoter
介绍MG-30 and MG-49 are modified, high performance, specialty natural rubbers prepared by graft polymerization of poly methyl methacrylate (PMMA) into a natural rubber latex. The number in the name denotes the percent of PMMA graphed to the elastomer; thus MG-49 has 49% PMMA and 51% natural rubber. The PMMA imparts stiffening and hardening characteristics to rubber compounds. An important use of MG-30 and MG-49 are in solution adhesives especially pressure-sensitive adhesives for bonding dissimilar materials. Adhesive compounders utilize these specialty elastomers in various different tape compounds including: PVC electrical insulation, paper craft, masking, protective and surgical tapes. NR/NBR blends benefit from the compatiblizing nature of the dual polarity in MG products. The plastic-like nature of the methyl methacrylate lends itself to preparation of high hardness/modulus, good physical properties, impact resistant, easy-processing rubber compounds. MG-30 and MG-49 can be blended with natural rubbers for intermediate durometers. It is cured essentially like conventional natural rubber. The viscosity and scorch properties are excellent compared to a highly loaded black compound. MG-30 and MG-49 are stiff and non-tacky at room temperature. Their thermoplastic nature allows good processing (calendaring and extruding) high durometer stocks.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Akrochem Corporation 产品展示 种类
Akroform® HMT-80/SBR/P Compatibilizer / Adhesion Promoter
Akrochem P-165 Compatibilizer / Adhesion Promoter
Akrochem HR-768 Compatibilizer / Adhesion Promoter
Resinall® R-771 Compatibilizer / Adhesion Promoter
Proaid® 800 Compatibilizer / Adhesion Promoter
Resinall® 1030 Compatibilizer / Adhesion Promoter
Akroform® HMT-65/SBR/P Compatibilizer / Adhesion Promoter
Akrochem P-191 Compatibilizer / Adhesion Promoter
Akrochem P-102 Compatibilizer / Adhesion Promoter
Akrochem P-194 Compatibilizer / Adhesion Promoter

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved