Micro-Melt® Maxamet® Alloy

牌号Micro-Melt® Maxamet® Alloy
厂家Carpenter Technology Corporation
分类Steel
介绍Micro-Melt® Maxamet® alloy is a high alloy content super-hard high speed powder tool steel possessing properties intermediate between conventional high speed tool steels and cemented carbide. The high room temperature and hot hardness of this alloy allow it to be considered for use in applications where conventional tool steels do not hold up, such as in dry machining.

The balanced alloying additions allow the alloy to provide excellent wear resistance due to a high carbide volume, but to maintain good toughness at high hardness levels. In addition, the combination of high hardness, hot hardness, and high temperature stability make the alloy a candidate for applications in which tools are coated prior to service.

Applications:
Micro-Melt Maxamet alloy may be considered for many types of tooling applications where either conventional high speed steels or cemented carbides are currently being used. Possible applications could include those where high speed steel is currently being used and an upgrade is desired but the switch to carbide is unattractive due to cost, tooling manufacture, toughness, or machine rigidity concerns; or applications where carbide is currently being used but is not cost-effective due to limited production runs or toughness/breakage problems.

Possible applications for this alloy could include:
Hobs
Punches
Form tools
Taps
End mills
Milling cutters
Thread roll dies
Indexable inserts
Broaches
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Micro-Melt® 440C Alloy Steel
AerMet® 310 Alloy Steel
Project 70+® Type 416 Stainless Steel
Pyrowear® 675 Stainless Steel
Micro-Melt® CD#1 Alloy Steel
Carpenter O1 Steel
Project 70+® Type 304/304L Stainless Steel
Touralloy 230 Plus Stainless Steel
Carpenter Stainless 17Cr-4Ni Steel
Carpenter® CTS® 40CP Alloy Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved