牌号 | NICROSIL Alloy |
厂家 | Carpenter Technology Corporation |
分类 | Nickel |
介绍 | The combination of NICROSIL/NISIL Alloys has been designated Type N by ASTM and ISA. There are three major deficiencies with the Type K thermocouple used in oxidizing atmospheres, those being: -In the temperature region of 500°C (932 °F) the positive thermoelement of the Type K couple is subject to short-range ordering causing a positive rapid change in the EMF. -Due to the oxidation of alloying constituents, EMF changes can occur at high temperatures in oxidizing atmospheres. -Failure (open circuit) of the thermoelements, normally the negative thermoelement, due to the oxidation of the wire at high temperatures. Originally, the NICROSIL/NISIL alloys were developed to improve oxidation resistance; however, the current NICROSIL alloy with chromium content 14.5% eliminates the drift in the EMF found in the positive Type K thermoelements operating at approximately 500°C (932°F). The increase of silicon plus the complete elimination of aluminum in the negative thermoelement NISIL, along with the addition of magnesium in both legs, reduces the drift in the EMF caused by preferential oxidation, and produces a better oxide film which slows down physical failure of the thermoelement. The magnesium addition enhances the formation of an oxide film which is resistant to spalling and progressive and/or selective oxidation. Tests indicate longer life, better accuracy for longer time periods and/or faster temperature response because finer sizes of NICROSIL/NISIL alloys can be used for the Type N compared to Type K thermocouples. |
Carpenter Technology Corporation 产品展示 | 种类 |
---|---|
Custom Age 625 PLUS® Alloy | Nickel |
TOPHET® Alloy C | Nickel |
Pyromet® Alloy 617 | Nickel |
Carpenter Alloy 925 | Nickel |
Pyromet® Alloy 31V | Nickel |
NIAL® Alloy | Nickel |
TOPHEL® Alloy | Nickel |
Carpenter HyMu "800" | Nickel |
Carpenter Waspaloy | Nickel |
Pyromet® Alloy 80A | Nickel |
订购说明