PARALOID™ K-125

牌号PARALOID™ K-125
厂家陶氏塑料
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍PARALOID K-125 processing aid is an all-acrylic, general purpose additive that offers outstanding efficiency in improving the processing characteristics of Vinyl compounds. Formulations containing the processing aid can achieve desirable performance with 25% less additive than conventional products, making PARALOID K-125 the most efficient processing aid for Vinyl available today for most applications.

When used in Vinyl compounds, processing behavior is markedly improved with no adverse effects on such properties as impact strength, thermal stability, tensile properties, DTUFL, or electrical characteristics.

Use of PARALOID K-125 not only improves important processing characteristics such as melt strength, faster fusion, and better edge formation, but also promotes melt homogeneity. The results are reduced surging, less melt fracture and plateout, faster takeoff, improved surface finish, and fewer rejects or shutdowns. The bottom line is improved productivity.

Because of the high measures of homogeneity and hot melt strength gained with the processing aid, extensibility of the Vinyl formulation is enhanced and is evidenced in the outstanding deep draw characteristics achieved in thermoforming. Sheet extensibility can be increased by a ratio of 5:1 when PARALOID K-125 is added to the formulation.

These same improvements in hot melt strength and homogeneity combine for faster processing rates, high surface quality, and better dimensional control in the finished product, even in highly filled systems such as pipe formulations.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
陶氏塑料 产品展示 种类
PARALOID™ BPMS-250 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-435 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-120P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-125P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-400P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ BPMS-260 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-120N Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-120N (ER) Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-125 ER Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-130P Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved