SE 1200

牌号SE 1200
厂家Braj Binani Group
分类Compatibilizer / Adhesion Promoter
介绍3B Direct Rovings consist of continuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibres assures an excellent resin-to-glass bonding. SE 1200 Direct Rovings are specifically designed for knitting process. The sizing of SE 1200 Direct Rovings is designed for excellent adhesion with thermoset resins. SE1200 Direct Rovings are in use in the manufacturing of windmill blades thanks to their high fatigue performances with polyester resins. Also, high corrosion resistance and high transmission of UV light make SE 1200 Direct Rovings the materials of choice for rehabilitation of sewer pipes by Cure In Place technologies. SE1200 Direct Rovings are also used in weaving process under specific conditions; contact us for further assistance.

FEATURES AND BENEFITS
Boron-free E-CR glass
  • -High corrosion resistance
  • -Approved for rehabilitation of sewer pipes
High level of UV transmission
  • -High productivity in UV CiPP (Cured in Place Pipe) technologies
Polyester, Vinylester, & Epoxies compatible
  • -Maximum flexibility on workshops
High fatigue performances with polyester resins
  • -Long life span of composites parts
  • -Approved for manufacturing of windmill blades
Medium strand integrity
  • -High efficiency and quality in knitting operations

Advantex® glass is a boron-free glass and presents significantly improved corrosion resistance across a wide range of aggressive environments. Advantex® glass is an E-CR glass in accordance with ASTM D578 and ISO 2078. This translates into important benefits for end-users over traditional E glass: longer service life, larger safety coefficients for the same design, and material savings. Traditional E-glass includes boron and often contains added fluorides. By using new manufacturing technology to eliminate these components from the glass composition, Advantex® glass has become a benchmark for integrated pollution prevention and the highest energy efficiency, all in an optimized process. 3B measures its efforts and works continually to minimize its impact on the environment and to set new standards within the global fibreglass industry. This is our commitment.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Braj Binani Group 产品展示 种类
Braj Binani 399 Direct Rovings Compatibilizer / Adhesion Promoter
CFM M8643 Compatibilizer / Adhesion Promoter
CFM M6060 Compatibilizer / Adhesion Promoter
SE 4535 Compatibilizer / Adhesion Promoter
SE 4740 Compatibilizer / Adhesion Promoter
CFM M 8630 Compatibilizer / Adhesion Promoter
CFM CM 4020 Compatibilizer / Adhesion Promoter
CFM M6065 Compatibilizer / Adhesion Promoter
CFM M 8615 Compatibilizer / Adhesion Promoter
R 25H Compatibilizer / Adhesion Promoter

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved