ULTRATUF™ 22

牌号ULTRATUF™ 22
厂家Spartech Plastics
分类TPO
介绍ULTRATUF™ 22 is a composite sheet utilizing short-strand fiber glass for reinforcement, which adds a high level of stiffness to a polyolefin base resin. ULTRATUF™ 22 is a replacement for traditional chopped-strand or closed mold fiberglass parts and can be easily thermoformed. The fiber glass component increases flexural modulus (part stiffness) and heat deflection temperature, making this alloy suited for under-the-hood applications. Other key features of ULTRATUF™ 22 include very low CLTE and good impact strength.

Features and Benefits
  • High level of stiffness
  • Low coefficient of thermal expansion
  • High heat deflection temperature
  • Good impact strength
  • Excellent chemical resistance
  • Fortified for large part thermoforming

Target Markets & Applications
ULTRATUF™ 22 is a great choice for a wide range of applications and market segments
  • Agricultural - for cooling fan shrouds, engine filter covers, feeder bins, partitions
  • Construction Equipment - for interior dash assemblies, engine covers, water shields, floor applications
  • Medium & Heavy Truck - for engine fan shrouds, interior instrument panel supports, HVAC covers
  • Power Sports - for ATV & snow skid plates, golf cart floor panels and rear body cargo holds
  • Automotive - for instrument panel supports, under the hood covers, dunnage trays

Processing
ULTRATUF™ 22 glass filled TPO sheet can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over aluminum cooled tooling results in the best part aesthetics. Molds made from fiberglass or epoxy can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340° F - 360° F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design.

ULTRATUF™ 22 is developed for fiberglass replacement applications requiring lower CTE and increased HDT.

Availability
ULTRATUF™ 22 is offered in black color with UV packages available.
ULTRATUF™ 22 is a custom extruded sheet product.
1. Sheets Size maximum width is 72-inch
2. Gauges 0.125 - 0.300-inch
3. Minimum Order 10,000 lbs.
Available Textures -Smooth Only
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Spartech Plastics 产品展示 种类
Royalite R84 PMMA+PVC
Spartech PE SP-1310 LDPE
Royalite R87/59 PMMA+PVC
Solarex® SV™ 聚酯合金
Royalite R540M ABS+PVC
WeatherPro™ Luran®/ABS SP-6720 ABS+ASA+丙烯酸
Packalloy LTO™ LTO 非特指聚烯烃(非特指聚烯烃)
Royalite R84/21 PMMA+PVC
Spartech PE SP-1510 HMWPE
Acrylloy 7 丙烯酸,未指定

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved