VICOTE® 706

牌号VICOTE® 706
厂家Victrex plc
分类PEEK
介绍VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film thicknesses range from < 100 microns up to 500 microns. Film thicknesses above 1 mm are possible by building up the coating thickness by the hot flocking technique.

Like other non-coating grades of VICTREX PEEK polymer, VICOTE Coatings are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines, the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.
  • High continuous use temperature of 260°C
  • Excellent wear, abrasion and cut through resistance at these high temperatures
  • Excellent chemical and radiation resistance
  • Low level of extractables
  • Hydrolysis resistant
  • Inherently flame retardant
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Victrex plc 产品展示 种类
VICTREX® PEEK 150GL30 BLACK PEEK
VICTREX® PEEK 90GL30 PEEK
VICTREX® PEEK 450G PEEK
VICTREX® PEEK 650CA30 PEEK
VICOTE® 705 PEEK
VICTREX® PEEK 650P PEEK
VICOTE® F813Blk PEEK
VICTREX® PEEK 150UF10 PEEK
VICTREX® PEEK 90CA30 PEEK
VICTREX® PEEK 90HMF40 PEEK

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved