| Component - Plastics | E107854 | |
| CELANESE INTERNATIONAL CORP | ||
| FORTRON BUSINESS LINE, 8040 DIXIE HWY, FLORENCE KY 41042 | ||
| 1140(a)(b)(c) | ||
| Polyphenylene Sulfide (PPS), "Fortron", furnished as pellets | ||
| Min Thk | Flame | RTI | RTI | RTI | |||
| Color | (mm) | Class | HWI | HAI | Elec | Imp | Str |
| ALL | 0.38 | V-0 | - | - | 130 | 180 | 200 |
| 0.81 | V-0 | 3 | 4 | 220 | 200 | 200 | |
| 1.5 | V-0 | 1 | 4 | 220 | 200 | 220 | |
| 3.0 | V-0 | 1 | 4 | 220 | 200 | 220 |
| Comparative Tracking Index (CTI): | 4 | Inclined Plane Tracking (IPT): | - |
| Dielectric Strength (kV/mm): | - | Volume Resistivity (10x ohm-cm): | - |
| High-Voltage Arc Tracking Rate (HVTR): | 3 | High Volt, Low Current Arc Resis (D495): | 5 |
| Dimensional Stability (%): | 0.0 |
| (a) - | May be followed by an A, B, D or L to indicate processability |
| (b) - | May be followed by a one digit number 0-9 incl. to indicate molecular weight. |
| (c) - | Virgin and regrind from 1 to 50% by weight incl. have the same basic material properties except RTI is 160 C @ a min. thickness of 1.5mm for the Mechanical w/ Impact property for regrind 26 to 50% incl. |
| NOTE - | These products are also produced and marketed by Ticona GmbH, Postfach 1561, 65444 Kelsterbach, Germany. |
| ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
|
Report Date:
1996-12-03 Last Revised: 2012-08-02 |
© 2015 UL LLC |
 |
| IEC and ISO Test Methods | ||||
| Test Name | Test Method | Units | Thk (mm) | Value |
| Flammability | IEC 60695-11-10 | Class (color) | 0.38 | V-0 (ALL) |
| 0.81 | V-0 (ALL) | |||
| 1.5 | V-0 (ALL) | |||
| 3.0 | V-0 (ALL) | |||
| Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | C | - | - |
| Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | C | - | - |
| IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
| IEC Ball Pressure | IEC 60695-10-2 | C | - | - |
| ISO Heat Deflection (1.80 MPa) | ISO 75-2 | C | - | - |
| ISO Tensile Strength | ISO 527-2 | MPa | - | - |
| ISO Flexural Strength | ISO 178 | MPa | - | - |
| ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
| ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
| ISO Charpy Impact | ISO 179-2 | kJ/m2 | - | - |