Component - Plastics		E116656
NOK CORP
ISOHARA FACTORY, 831-2 KAMI-SOHDA, ISOHARA-MACHI, KITAIBARAKI-SHI IBARAKI-KEN 319-1593 JP
IR#A-@(a)
Polyurethane (PUR), furnished as finished parts

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
GN	0.40	HB	-	-	50	50	50
NC	0.80	V-2	-	-	50	50	50
NC, RD	3.0	V-2	-	-	50	50	50
NC, RD, WT	6.0	V-2	-	-	50	50	50

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

# -	A two digit number 88-99 denoting hardness of the material.
(a) -	A digint number 0-2 denoting a sort of nucleating agent.
@ -	A digit number 0-9 denoting color of the material.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1990-12-28 Last Revised: 2003-10-24

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	0.40	HB75 (GN)
			0.80	V-2 (NC)
			3.0	V-2 (NC, RD)
			6.0	V-2 (NC, RD, WT)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-