Component - Plastics		E135495
KANEKA NORTH AMERICA L L C, APICAL DIV
6161 Underwood Rd, Pasadena TX 77507-1033
(g)NPI(o)(@), (g)NPP(o)(@), (h)NP(o)(@)
Polyimide (PI), "Apical", furnished as sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC	0.0075-0.01249	VTM-0	-	-	220	-	200
	0.0125-0.02495	VTM-0	-	-	240	-	200
	0.025-0.125	V-0	-	-	240	-	200

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(@) -	Grades (g)NPI(o), (g)NPP(o), (h)NP(o), (g)AH(o), (g)AHP(o), and (h)AV(o) are identical to each other except for thickness
(g) -	May be any number representing product thickness in microns.
(h) -	May be any number representing product thickness in 0.01mil
(o) -	Suffix optional except "I" or "P"

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1990-10-01 Last Revised: 2012-08-21

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	ISO 9773, IEC 60695-11-10	Class (color)	0.0075-0.01249	VTM-0 (NC)
			0.0125-0.02495	VTM-0 (NC)
			0.025-0.125	V-0 (NC)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-