Component - Plastics		E253246
SEYANG POLYMER CO LTD
130B-8L 695-7 KOJAN-DONG, NAMDONG-KU, INCHON KR
GR7301(+)
Polyamide 6 / Acrylonitrile Butadiene Styrene (PA6/ABS), glass reinforced, "Sytron", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
ALL	0.8	HB	-	-	60	60	60
	1.2	HB	-	-	60	60	60
	1.5	HB	-	-	60	60	60
	3.2	HB	-	-	60	60	60

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(+) -

May be replaced by one, two, or three number(s) and/or letter(s) and also represents Virgin and regrind up to 25% by weight inclusive, having the same basic material characteristics

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2010-07-27 Last Revised: 2010-07-27

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	0.8	HB75 (ALL)
			1.2	HB75 (ALL)
			1.5	HB75 (ALL)
			3.2	HB40 (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-