ATI Steel ATI 409Cb™

牌号ATI Steel ATI 409Cb™
厂家Allegheny Technologies Incorporated
分类Steel
介绍ATI 409HP™ (UNS S40900) ferritic stainless steel was introduced by ATI Allegheny Ludlum in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-1", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened the utility of ATI 409HP™ stainless.

Since its introduction, the ATI 409HP™ alloy has been widely used in automotive exhaust systems for manifolds, exhaust pipes, catalytic converters, mufflers, tail pipes and other components. ATI 409HP™ stainless steel sheet has also found many other applications such as in culverts, home heating systems, automotive thermostats and fuel filters, electrical transformer cases, caskets, heat exchanger tubing, and various farm equipment components. Plate has been used as blades and vanes in standby power generation turbines and as jet engine sound-deadening devices at airports.

The performance of ATI 409HP™ (UNS S40900) ferritic stainless steel in most applications is excellent. However, some industry applications have resulted in intergranular corrosion of weld heat-affected zones. The result of research into this problem led to ASTM's re-definition of ATI 409HP™ stainless steel. The old UNS S40900 with 0.08% carbon maximum and Ti>5xC was found to be inadequate, but there was no consensus among users how to define the new grade. Therefore, three new grades of ATI 409HP™ stainless steel were created,

ATI 409Cb™ alloy (UNS S40945) was developed to eliminate the problems encountered when brazing S40900 stainless steel that was stabilized only with Ti. The dual-stabilized S40930 version of ATI 409HP™ alloy usually provides the same benefit and now is used for brazing applications.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel MINIMISER® 316L Steel
ATI Steel ATI 409HP™ (UNS S40920) Steel
ATI Steel ATI C-250™ Steel
ATI Steel ATI 303™ Steel
ATI Steel ATI 9™ Steel
ATI Steel ATI 13-8™ (Plate) Steel
ATI Steel ATI 310™ Steel
ATI Steel ATI 317™ Steel
ATI Steel ATI 334Mo® Steel
ATI Steel ATI 410HC™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved