| 牌号 | Akrosperse® ZnO/CN-80/NBR/S |
| 厂家 | Akrochem Corporation |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | Akrosperse® ZnO/CN-80/NBR/S is a polymeric dispersion of specially-treated zinc oxide. This is a high purity ZnO designed to improve scorch time in carboxylated nitriles. It can replace zinc peroxide dispersions at a much lower cost (use part-for-part on an active material basis). Typical dosage is 6.25 phr (5 phr ZnO/CN). Most zinc peroxide dispersions require 10 phr to get equal activity. As the accompanying data shows, an equal activity loading of ZnO/CN-80 gives a higher state-of-cure than ZP-1014 (zinc peroxide) which translates into higher modulus, improved abrasion resistance and lower compression set. |
| Akrochem Corporation 产品展示 | 种类 |
|---|---|
| Akrochem P-4000 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Peptizer E-19204 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akrosperse® ZnO-85/EPR/S | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akroform® ZnO-85/NBR/P | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Proaid® LCF | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akrochem 7-Spray | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akroform® IS-70/SBR/P | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akrochem HR-532 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Akrosperse® ZnO-85/SBR/S | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Polymist® F-5A | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
