Atmer™ 1440

牌号Atmer™ 1440
厂家Croda Polymer Additives
分类Anti-fogging Agent
介绍Atmer 1440 is recommended as an anti-fogging additive in polyolefin food wraps

Mode of action
  • Atmer 1440 can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it helps to lower the surface tension and subsequently reduces water droplets allowed to condense on the plastic. The water droplets are then able to spread into a continuous, uniform layer on the fabricated film.

Feature and benefits
  • Improves transparency through packaging
  • Improved durability of contents
  • Improved presentation of food contents
  • More appealing packaging content for consumers

Guidelines for use
  • Atmer 1440 can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion though, mechanical means are preferred.
  • Typical addition levels are 0.5 - 4%
货期:现货
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Croda Polymer Additives 产品展示 种类
Atmer™ 185 Anti-fogging Agent
Atmer™ 7373 Anti-fogging Agent
Atmer™ 7301 Anti-fogging Agent
Atmer™ 645 Anti-fogging Agent
Atmer™ 674 Anti-fogging Agent
Atmer™ 100 Anti-fogging Agent
Atmer™ 103 Anti-fogging Agent
Atmer™ 1006 Anti-fogging Agent
Atmer™ 1440 Anti-fogging Agent
Atmer™ 116 Anti-fogging Agent

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved,沪ICP备:15027283-1号