Cardia Biohybrid™ H-FM

牌号Cardia Biohybrid™ H-FM
厂家Cardia Bioplastics™
分类TPS+PP
介绍Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material.
  • A Biohybrid resin for foaming applications where biodegradability is not required.
  • For use in applications where the use of renewable resources are desired.
  • Can be used with chemical and physical blowing agents

Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities.

Applications
  • Extrusion foaming of packaging shapes
  • Extrusion foaming of sheet for packaging and cushioning
  • Extruded boards for packaging and insulation applications
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Cardia Bioplastics™ 产品展示 种类
Cardia Compostable™ B-MT02 (Flex) TPS+共聚多酯
Cardia Compostable™ B-MT01 TPS+共聚多酯
Cardia Compostable™ B-M TPS+共聚多酯
Cardia Biohybrid™ H-M01 TPS+PE
Cardia Biohybrid™ H-M03 TPS+PP
Cardia Biohybrid™ H-F TPS+PE
Cardia Biohybrid™ H-BM TPS+PP
Cardia Biohybrid™ BL-F TPS+PE
Cardia Biohybrid™ H-FM TPS+PP
Cardia Compostable™ B-F TPS+共聚多酯

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved