Cel-Span ® Process Aid 101

牌号Cel-Span ® Process Aid 101
厂家Phoenix Plastics Co., Inc.
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Cel-Span® Process Aid 101
  • An internal lubricant and coefficient of friction modifying additive.
  • Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that is incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

Applications: Injection Molding
  • For best results, laboratory tests or preproduction trials should determine the optimum additive level. Cel-Span® Process Aid 101 internal lubricant is effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements such as pigments and fillers. A high amount of filler may require a higher percentage of internal lubricant. Always start an evaluation at 5 parts per 1000 (0.5%). The internal lubricant may increase the melt flow index (MFI). Reduce the level of Cel-Span® Process Aid 101 or reduce the process temperature to raise the resin viscosity and eliminate screw slippage.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Phoenix Plastics Co., Inc. 产品展示 种类
Cel-Span ® Process Aid 619 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Process Aid 306 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Process Aid 101 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Purge 377 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Process Aid 305 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Process Aid 701 Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Purge 388FG Slip Agent / Lubricant / Mold Release / Processing Aid
Cel-Span ® Process Aid 610L Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved