牌号 | DYNAMAR™ Polymer Processing Additive FX 5920B |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dynamar™ Polymer Processing Additive FX 5920B is designed for those who want to determine processing additive levels by x-ray fluorescence. Dynamar FX 5920B utilizes our proven 3M™ Dynamar™ FX 5920A processing additive technology. FX 5920B contains 10% barium sulfate as a tracing additive. By quantifying the barium level via known x-ray fluorescence techniques, one can easily calculate the amount of polymer processing additive that has been incorporated into the plastic. FX 5920B is a free-flowing fluoropolymer-based processing aid that is designed for use at very low levels to improve processing of thermoplastics. At use levels (typically 500-1500 ppm) necessary to improve processing, it does not alter or detract from the good physical properties associated with high strength plastics. FX 5920B can offer performance and cost advantages over comparable loadings of other processing additives. It exhibits exceptional commercial utility in low melt index, film grade linear low-density polyethylene (LLPDE) and high-density polyethylene (HDPE). It is especially effective in polyolefin resins containing silica-based antiblocking agents, titanium dioxide-based pigments and other inorganic additives. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins. FX 5920B lowers apparent melt viscosity and permits fabricators to use high strength resins which otherwise could not be processed on available equipment. As a processing aid, FX 5920B eliminates melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of FX 5920B may also allow an increase in output and yield films with enhanced and balanced bi-directional physical properties and improved clarity and gloss. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ PTFE TF 5070GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5922 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5920B | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FT 2350 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FG 5630Q | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2179 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ Micropowder J14 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ TFM™ 1705 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明