牌号 | Dyneon™ FLUOROELASTOMER FC 2230 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2230 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2230 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ FLUOROELASTOMER FT 2430 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 9207Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FT 2350 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 1620 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5920B | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FE 5623 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE DISPERSION TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5912 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2211 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5050Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明