DYNAMAR™ Polymer Processing Additive FX 5927

牌号DYNAMAR™ Polymer Processing Additive FX 5927
厂家3M Advanced Materials Division
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍3M™ Dynamar™ Polymer Processing Additive FX 5927 is an improved performance PPA as compared to conventional process aids. This free-flowing fluoropolymer based processing additive is designed for use at very low levels to improve processing of thermoplastics. It utilizes unique technology which makes it particularly effective as a processing additive for linear low density polyethylene blown film. At the very low use levels (typically 100 - 800 ppm) necessary to improve processing, it does not detract from the good physical properties associated with high strength plastics.

As a processing additive Dynamar FX 5927 can eliminate melt fracture and reduce die build-up, extruder torque and pressure. Through optimization of the extrusion process, FX 5927 may also allow for an increase in output and improved optical properties such as clarity and gloss. This optimization can yield films with enhanced bidirectional physical properties. FX 5927 can also improve sustainability by improving processability of high strength resins, which allows for down-gauging.

Compared to many conventional PPAs FX 5927 exhibits enhanced melt fracture elimination performance in a variety of polyolefin resins, encompassing a wide range of melt index, molecular weight distribution, and density. It exhibits exceptional commercial utility in film grade linear low density polyethylene (LLPDE), metallocene linear low density polyethylene (mLLDPE) and high density polyethylene (HDPE). It is especially effective in polyolefin resins containing talc and silica-based antiblocking agents, titanium dioxide-bases pigments, fillers, and other inorganic additives. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins.

FX 5927 can be easily incorporated and dispersed into masterbatch form. FX 5927 exhibits an outstanding balance of properties for dispersibility and effectiveness for melt fracture elimination.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
3M Advanced Materials Division 产品展示 种类
Dyneon™ FLUOROELASTOMER FX 3735 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ Micropowder J24 Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 5922 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TFM 1700 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 5033Z Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 9614 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ FLUOROELASTOMER FC 2120 Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 9613 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ FLUOROELASTOMER FC 2176 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ FLUOROELASTOMER FX 9194 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved