| 牌号 | Dyneon™ FLUOROELASTOMER FC 2144 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2144 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2144 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| DYNAMAR™ Polymer Processing Additive FX 5920B | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ Micropowder J14 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5927 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FG 5630Q | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2123 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2230 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FPO 3630 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER LTFE 6400 Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5951 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
