| 牌号 | Dyneon™ FLUOROELASTOMER FC 2123 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2123 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2123 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ PTFE TF 1620 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1645 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5060G Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2121 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 2025Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TFM 1700 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 9205 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2174 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5050Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
