牌号 | Dyneon™ FLUOROELASTOMER FT 2320 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FT 2320 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FT 2320 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ PTFE TFM 1700 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 9194 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 1750 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ Micropowder J14 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5911 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5060GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FE 5623 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明