Escoat® P-30 Solids

牌号Escoat® P-30 Solids
厂家Mayzo
分类Antiblock
介绍Escoat® P-30 Solids is a non-silicone product especially produced and widely used as the industry standard for pressure sensitive labels, film and tapes. Its high degree of purity, quality and very tight melting point range offers superior properties and performance to critical users.

Applications: Escoat® P-30 Solids provides superior release properties and prevents delamination or tearing when applied to the backing on the side opposite the adhesive. It has been extensively tested and is widely approved for use with pressure sensitive tapes such as polypropylene, polyester, polyethylene, cellophane, duct tapes and other substrates that require unwinding ease. May also be used for foil and paper.

Advantages:
  • Extremely narrow melting point range (+3°C) assures consistent release properties. Listed on the certificate of analysis.
  • Release effects remain stable after oven aging.
  • Cost efficient. Requires a lower quantity than silicone release coatings. 0.01 to 1.0 grams of Escoat® P-30 Solids for one square meter of film is sufficient. Excellent release can be obtained using between 0.3-2.0% solids material in toluene, depending on film, coating equipment and desired release levels. Only needs a near-monomolecular film.
  • 100% dry powder.
  • No fire hazard or special red-label storage area required for Escoat® P-30 Solids dry powder.
  • One step dilution process. Properly diluted solution will not gel.
  • Does not require high temperature processing that is typically needed for silicone coatings.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Mayzo 产品展示 种类
MPM® 1101 Antiblock
Escoat® P-20 Solids Antiblock
Escoat® WPX 40 Antiblock
Escoat® P-30 Solids Antiblock
BNX® 1112 Antiblock
BNX® 1113 Antiblock
BLS® 234 Antiblock
BLS® 1770 Antiblock
BNX® MPM 1110 Antiblock
MAYZO RA-120W Antiblock

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved