FIPOLDER™ SHP1500-2

牌号FIPOLDER™ SHP1500-2
厂家Two H Chem Ltd.
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍SP Series™ SHP1500-2 is a high molecular weight high density polyethylene (HMWHDPE) polymer in fine particle powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series ™ powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects.

Polyethylene Microparticle Powder Summary
Pure High density polyethylene homopolymer polymer in finely sized rounded powder form.

Microparticles are fine particles between aproximately 0.1 and 150 micron (um) in size. Everyone encounters microparicles on a daily basis when exposed to substances found in the natural environment such as pollen, very fine sand, and dust. Visit the University of Utah learning center for an interesting illustration of size and scale found in nature. By comparison, an individual themrmoplastic microparticle as illustrated by the micro photographs below are generally to small to be seen by the naked eye. In large quantities, microparicles are often referred to as micropowders.

Because microparicles are so small in size, they have a large surface-to-volume ratio which can be of great benefit to industry. Aspect ratio, the ratio of its longer dimension to its shorter dimension, can also have a significant impact on application performance. Therefore, size and shape of microparicles are valued for the properties they provide. Plastic microparticles are most often used as a minor component in a formulary product for industry.

Primarily Microparicle Markets for finely sized thermoplastic powders include fiberglass reinforced plastics, cosmetics, inks and toners, paints and coatings, partitioning, textiles and many other industries.

FIPOLDER products are predominantly used as an additive or bonding agent in the manufacture of the following products:
Glass fiber reinforced plastics (SMC, BMC : low shrinkage agent, lubricant)
Plastic-elastomer blends (anti-adhesive)
Paints and varnishes
Dry cell batteries
Cosmetics
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Two H Chem Ltd. 产品展示 种类
PROPOLDER™ MPP2100 Slip Agent / Lubricant / Mold Release / Processing Aid
PROPOLDER™ FPP2080 Slip Agent / Lubricant / Mold Release / Processing Aid
FIPOLDER™ SHP1535-1 Slip Agent / Lubricant / Mold Release / Processing Aid
PROPOLDER™ MPP2020 Slip Agent / Lubricant / Mold Release / Processing Aid
PROPOLDER™ FPP2060 Slip Agent / Lubricant / Mold Release / Processing Aid
NOVACOM™ HFS2100P Slip Agent / Lubricant / Mold Release / Processing Aid
FIPOLDER™ HM200 Slip Agent / Lubricant / Mold Release / Processing Aid
NOVACOM-P™ HFS2100P Slip Agent / Lubricant / Mold Release / Processing Aid
FIPOLDER™ SHP1500-1 Slip Agent / Lubricant / Mold Release / Processing Aid
PROPOLDER™ FPP2040 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved