牌号 | Hipernom® Alloy |
厂家 | Carpenter Technology Corporation |
分类 | Nickel |
介绍 | Hipernom® alloy is a soft magnetic alloy containing approximately 80% nickel, 4.20% molybdenum, and 15% iron which develops extremely high permeabilities with minimum hysteresis loss. Its analysis is the same as that of Carpenter HyMu "80"® alloy, which is available in strip, bar, wire and billet form. This material is provided with the correct temper to permit users to perform a variety of cold forming operations. It can be fabricated into shields by roll forming, spinning, deep drawing, hydroforming and other conventional sheet metal operations. Where joining is required, spot welding or tungsten inert gas welding-with or without a base metal filler rod-can be used. To develop best shielding characteristics, shields must be annealed at 1900°F (1040°C) or higher after all other fabricating operations have been completed. In general, higher annealing temperatures yield higher attenuation and permeability as well as better shielding characteristics. Hipernom alloy is available in sheet form 30" x 120" (76 x 305 cm) by various thicknesses. Applications: Hipernom alloy has been used primarily in shielding applications to protect electrical equipment from stray magnetic fields. |
Carpenter Technology Corporation 产品展示 | 种类 |
---|---|
Pyromet® Alloy 751 | Nickel |
EVANOHM® Alloy R | Nickel |
Pyrotool® Alloy W | Nickel |
Hipernom® Alloy | Nickel |
Carpenter Nickel 200/201 Alloys | Nickel |
Pyromet® Alloy 901 | Nickel |
Carpenter Waspaloy | Nickel |
Pyromet® Alloy 600 | Nickel |
Pyromet® Alloy 617 | Nickel |
EVANOHM® Alloy S | Nickel |
订购说明