INSPIRE™ DLGF 9621.00

牌号INSPIRE™ DLGF 9621.00
厂家Trinseo
分类TPO
介绍DLGF 9621.00 is a polypropylene homopolymer reinforced with 60% by weight of long glass fibres. (PP-LGF60, Long Glassfiber Granulate).

DLGF 9621.00 is produced by pultrusion /melt-impregnation process, thereby ensuring thorough impregnation of all the glassfibers and also providing improved 'pellet robustness' for air conveying. It is available in two equivalent versions: the 'MR' version produced in USA and the 'TR' version produced in Europe. Both are available in 'standard black'.

This PP-LGF60 is a concentrate which has to de diluted with either 'neat'-polypropylene and/or mineral filled PPbased compounds. The 'dilution' is typically done as a dryblend of granulates by means of gravimetric dosing devices at the injection-molding machine. A weight ratio of 1 : 1 of DLGF 9621.00 and i.e. LGF 8100 PP-copolymer will result in a composite-system having 30% by weight of glassfibers.

DLGF 9621.00 has been especially formulated to meet the long term heat ageing resistance (LTHA) required for use in some automotive 'interior' applications i.e. instrument panelcarrier or integrated door-modules. LTHA> 1000 h @140°C and/or LTHA > 400 h @150°C will be achieved after dilution to 30% GF-content with ‘neat'-PP (LGF 8100).

The 'long' glass fibres (11 mm length) provide high stiffness, strength and impact-resistance of the injection molded parts. The properties shown below have been measured on standardized ‘dogbone'-shape specimens (ISO 3167).
Note : The mechanical properties which will be present in 'real' injection-molded parts may be different - depending on the fiber-orientation and the fiber-length distribution profile - which themselves are resulting from hardware configuration and processing parameters (such as i.e. the type of screw and mixing elements, diameter and radii of nozzle and hot-runners, number and size of gates, injection speed during mold filling and backpressure during dosing cycle).
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Trinseo 产品展示 种类
VELVEX™ 5250 SC TPO
INSPIRE™ TF1305 SC TPO
INSPIRE™ TF1305 ESU TPO
INSPIRE™ TF1311 SC TPO
Polypropylene DGF080.00 ESU TPO
Polypropylene DLGF9411.00 TPO
INSPIRE™ DLGF 9621.00 TPO
INSPIRE™ TF1500SC TPO
INSPIRE™ DTF8000ES TPO
INSPIRE™ TF1500 ESU TPO

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved