ISPLEN® PB-110 H2E
| 牌号 | ISPLEN® PB-110 H2E |
| 厂家 | REPSOL |
| 分类 | PP共聚物 |
| 介绍 | ISPLEN® PB-110 H2E is a block ethylene-propylene copolymer with a high molecular weight. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes. Its very high impact strength, even at low temperatures, and stress cracking also can use in critical conditions. Other applications are corrugated pipes for sewage, due to its high modulus ADDITIVATION ISPLEN® PB-110 H2E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability and increase the hot-water extraction resistance. The processor may include other additives. Formulation allows polymer stability during the normal conditions of processing and use. COLOURING ISPLEN grades are supplied in natural colour but it can be easily coloured with pigments steady at processing temperatures, using dry-colouring or masterbatch techniques. FOODSTUFF REGULATIONS ISPLEN® PB-110 H2E is approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our Technical Service. ISPLEN® PB110H2E is a very low melt flow propylene heterophasic copolymer with a reinforced formulation for extrusion process, and a high thermal stabilisation. Its crystalline structure gives a high rigidity and very high tensile strength resistance. Its flow characteristics and mechanical properties make it specially adapted for high thickness and good glossy surface films or sheets. It can be easily coloured during the extrusion process using the right pigments, especially in the form of masterbatches with a higher melt flow rate than that of the base polymer. APPLICATIONS In extrusion process requiring high melt viscosity strength and particularly high tensile properties, such as:
Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
在线客服: 
申请技术报告方式
可通过以下我公司客服QQ，索要技术报告
| 客服1： |
客服2： |
| REPSOL 产品展示 | 种类 |
|---|---|
| ISPLEN® PC 372 AV | PP共聚物 |
| ISPLEN® PM 276 BV | PP共聚物 |
| ISPLEN® PM 281 EV | PP共聚物 |
| ISPLEN® PM 275 DV | PP共聚物 |
| ISPLEN® PM 284 AS | PP共聚物 |
| ISPLEN® PM 281 AV | PP共聚物 |
| ISPLEN® PC 270 AV | PP共聚物 |
| ISPLEN® PM284 AV | PP共聚物 |
| ISPLEN® PC 270 BS | PP共聚物 |
| ISPLEN® PC 262 AV | PP共聚物 |
订购说明
上海松翰塑化科技有限公司订货流程
【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。