牌号 | Maxfil™ MX104 |
厂家 | The R.J. Marshall Company |
分类 | Flame Retardant |
介绍 | Alumina Trihydrate (Al2O3-3H2O) is the most widely used flame retardant in the world due to its versatility and low cost. Available in different particle sizes, it can be used in a wide range of polymers at processing temperatures below 220°C. ATH is non-toxic, halogen-free, chemically inert, and has low abrasiveness. Additional benefits are arc and track resistance in plastics exposed to electrical arcing, acid resistance, and smoke suppression. At about 220°C, ATH begins to decompose endothermically releasing approximately 35% of its weight as water vapor. Al2O3-3H2O + HEAT --> Al2O3 + 3 H2O Alumina Trihydrate acts as heat sink thereby retarding pyrolysis and reducing the burning rate. The water vapor released has an added effect of diluting combustion gases and toxic fumes. A 4.5 micron engineered ATH, MX104 allows for higher filler loadings and lower resin requirements than can be achieved with typical ATH grades. MX104 will lower production cost and increase flame retardance and smoke suppression. A series of engineered alumina trihydrate (ATH) flame retardant fillers created for maximum filler loadings, extremely low viscosities, increased flame retardance and decreased formulation costs. Using Maxfil MX100, MX104 or MX200 can achieve better glass wet-out, help reduce shrinkage and warpage, while also increasing the ability to achieve UL 94-VO, UL94 5VA and ASTM E84 Class 1 flame & smoke ratings. |
The R.J. Marshall Company 产品展示 | 种类 |
---|---|
ATH A206 | Flame Retardant |
H-TEC™ HTMB2 | Flame Retardant |
H-TEC™ HT 1000 | Flame Retardant |
ATH AH 330 | Flame Retardant |
ATH A 245 | Flame Retardant |
C-TEC™ LS Z8A | Flame Retardant |
ATH AH 430 | Flame Retardant |
ATH A210 | Flame Retardant |
C-TEC™ CT-FR Z20S | Flame Retardant |
Dense Fill™ DF230 | Flame Retardant |
订购说明