PARALOID™ K-120N

牌号PARALOID™ K-120N
厂家陶氏塑料
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍PARALOID K-120N processing aid is an acrylic polymer in lower-dusting, free-flowing powder form that improves the melt processing characteristics of rigid and plasticized Vinyl compounds. The processing of rigid Vinyl compounds based on high-molecular weight homopolymer resin is extremely difficult. Surface imperfections, such as air streaks or melt fractures, are frequently encountered in calendered and extruded rigid Vinyl materials. PARALOID K-120N processing aid helps eliminate these defects by improving the flow characteristics of Vinyl compounds.

Low-molecular-weight Vinyl (polyvinyl chloride) and vinyl chloride copolymers have better processing characteristics than high-molecular-weight Vinyl resins. The improved processability, however, is gained at some sacrifice of physical properties and chemical resistance, and in some cases, it is also accompanied by a decrease in thermal stability.

PARALOID K-120N processing aid, used in the two-to-ten percent range, improves the processing of high-molecular-weight Vinyl without significantly affecting its physical and chemical properties. PARALOID K-120N processing aid, which is readily adaptable to Vinyl powder blends, is easily incorporated into and is completely compatible with all commonly used grades of Vinyl resin.

Its lower-dusting properties help to reduce safety hazards.

PARALOID K-120N processing aid can be used for Vinyl food contact articles under FDA Regulation Nos. 21CFR175.300, 21CFR177.1010 and 21CFR178.3790. Manufacturers interested in making food-grade products should consult our technical representatives on proper formulating procedures.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
陶氏塑料 产品展示 种类
PARALOID™ BPMS-260 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-125 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-120N Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-125 ER Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ BPMS-265 Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-400P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-120P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-130P Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-175 ER Slip Agent / Lubricant / Mold Release / Processing Aid
PARALOID™ K-416 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved