STRUKTOL® 40 MS

牌号STRUKTOL® 40 MS
厂家Struktol
分类Compatibilizer / Adhesion Promoter
介绍COMPOSITION
  • Mixture of dark aromatic hydrocarbon resins

RECOMMENDATIONS FOR APPLICATION
  • STRUKTOL® 40 MS improves the homogeneity of elastomers of different polarity and viscosity. It is rapidly absorbed by the polymers during the mixing cycle. A relatively low viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated. The homogenizing agents are particularly effective with those elastomer blends which tend to crumble at the beginning of the mixing cycle. In most cases 40 MS is added along with the polymers in the mixing cycle. The reduction of compound viscosity and "nerve" achieved with STRUKTOL® 40 MS assists downstream processing. For instance, bagging tendency can be reduced, extrusion rates are increased without increasing die swell, and calendering properties are improved. These benefits are retained even after long storage periods of the green compound.
  • STRUKTOL® 40 MS increases the green tack of many compounds although strictly it is not a tackifier. It does, however, boost the efficiency of other tackifying agents.
  • STRUKTOL® 40 MS does not harden during vulcanization. The hardness of the vulcanizate is not reduced as much as when using, for example, mineral oil plasticizers. Because of its color, STRUKTOL® 40 MS is not suitable for light colored compounds. Staining may occur under certain conditions. Where non staining is specified, STRUKTOL® RP 28 should be used.
  • STRUKTOL® 40 MS has good solubility in aromatic and chlorinated hydrocarbon oils.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Struktol 产品展示 种类
STRUKTOL® SCA 989 Compatibilizer / Adhesion Promoter
STRUKTOL® SU 95AF Compatibilizer / Adhesion Promoter
STRUKTOL® 40 MS Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 98 Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 984 Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 98 WT Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 98 CB Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 989 WT Compatibilizer / Adhesion Promoter
STRUKTOL® SU 109A Compatibilizer / Adhesion Promoter
STRUKTOL® SCA 985 CB Compatibilizer / Adhesion Promoter

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved